Support Library

Recoil Pad Installation Instructions


  • Installation Video
  • Product Support

LimbSaver - Choosing & installing the correct recoil pad

Professional Support

Installation

We have handy Youtube channel videos and additional printed catalogs, guides and other materials available on demands.

Support Desk

For questions and problems, you can always get in touch with our support desk, so we can get you back, up and running.

For Models: #10011 / #10803

The #10011 is also equipped to fit the Ruger Recessed/Skelton composite stock with the included adapter plate. (If you do not have this specific stock you may discard the adapter plate) Simply unscrew the original stock pad and place the adapter plate protrusion part down towards the inside stock hole. Use the provided screw and the install the adapter plate using the middle screw hole. You are now ready to install the LimbSaver recoil pad. (Please make sure you use the existing screws that came with the stock)

For Models: #10201-#10809

The #10201-#10809 is also equipped to fit the same Mossberg with different screw hole specs. If your screw placement is 15/16” from the heel to center of first screw hole and 7/16” from toe end to center of first screw hole then you will need the included adapter plate. Simply unscrew the original stock pad and place the adapter plate beveled side down towards the inside of the stock. Use the provided screw to install the adapter using the 3rd screw hole which is located 1 3/8” from the toe end. You are now ready to install the LimbSaver recoil pad. (Please remember to use the screw that came with your stock)

For Models: #10401-#10404/#10810

The #10401-#10404/#10810 is also equipped to fit the 12 ga. pop-in pads such as the Nova.

Unscrew and remove factory recoil pad.

Install AirTech recoil pad using factory screws and screw holes. Note: Lubricate screw driver with gun oil.

When using adapter plate:

1. Take the #8 1” steel screws that came with the package and feed them into the holes on the top of the recoil pad making sure the beveled part is facing the inside of the stock. Using a lubricated Philips Screwdriver, push screws all the way down inside the recoil pad until the screw head hits the plastic backing plate.

2. Take the adapter and match the shape with the bottom of the recoil pad. Screw on the adapter until you see the tip of the screws starting to come out the other side and stop. You should have at least a ¾” in space between the adapter and the bottom recoil pad plate.

3. Place the heel of the recoil pad in the butt of the gun first and then lower the toe of the recoil pad into the stock as much as you can. Take your fist and slam it on top of the recoil pad – you will hear a snap which means the adapter has snapped under the inner rim and is in place. Tighten recoil pad to the stock.


All Recoil Pad Templates

The #10011 is also equipped to fit the Ruger Recessed/Skelton composite stock with the included adapter plate. (If you do not have this specific stock you may discard the adapter plate) Simply unscrew the original stock pad and place the adapter plate protrusion part down towards the inside stock hole. Use the provided screw and the install the adapter plate using the middle screw hole. You are now ready to install the LimbSaver recoil pad. (Please make sure you use the existing screws that came with the stock)


Grind-to-Fit Recoil Pads

Each of the following template pages provides an outline of the specified LimbSaver® Grind-to-Fit Recoil Pad.
Speed Mount
Med/Plus
1″ thick L.O.P.
5 – 1/2” X 1 – 31/32”Grindable to: 3 – 28/32” X 1 – 11/32”
Low-Profile
Medium
5/8″ thick L.O.P.
5 – 1/2” X 1 – 31/32”Grindable to: 3 – 28/32” X 1 – 11/32”
Standard
Small
1″ thick L.O.P.
4 – 13/16” X 1 – 27/32”Grindable to: 3 – 7/8” X 1 – 11/32”
Standard
Medium
1″ thick L.O.P.
5 – 3/32” X 1 – 13/16”Grindable to: 4 – 1/4” X 1 – 5/16”
Standard
Large
1″ thick L.O.P.
5 – 9/16” X 2 – 1/16”Grindable to: 4 – 7/16” X 1 – 19/32”
  • Installation Video
  • Product Support

How to properly grind and install a LimbSaver Grind-to-Fit pad

Professional Support

Installation

We have handy Youtube channel videos and additional printed catalogs, guides and other materials available on demands.

Support Desk

For questions and problems, you can always get in touch with our support desk, so we can get you back, up and running.


Slip-On Recoil Pads

Each of the following template pages provides an outline of the specified LimbSaver® Slip-On Recoil Pad.
Small
1″ thick L.O.P.
4 – 1/2” X 1 – 1/2”Up to: 4 13/16” X 1 – 5/8”
10546 / 10550
Medium
1″ thick L.O.P.
4 – 13/16” X 1 – 5/8”Up to: 5 – 1/8” X 1 – 3/4”
10547 / 10551
Large
1″ thick L.O.P.
5 – 1/8” X 1 – 3/4”Up to: 5 – 3/8” X 1 – 7/8”
10548 / 10552
Small/Medium
1/2″ thick L.O.P.
4 – 5/8” X 1 – 9/16”Up to: 5 – 1/8” X 1 – 3/4”
10545 / 10549

  • Installation Video
  • Product Support

PT100 Fall-Away Arrow Rest Installation Video

Professional Support

Installation

We have handy Youtube channel videos and additional printed catalogs, guides and other materials available on demands.

Support Desk

For questions and problems, you can always get in touch with our support desk, so we can get you back, up and running.


  • Installation Video
  • Product Support

Silent Quiver Installation Video

Professional Support

Installation

We have handy Youtube channel videos and additional printed catalogs, guides and other materials available on demands.

Support Desk

For questions and problems, you can always get in touch with our support desk, so we can get you back, up and running.



Bow String Chart

DeadZone DZ-32 Large Cam Bows:

String:C5001255 1/16”Bronze/Silver8125-16” End Serving
Buss:C5001334 15/16”Bronze/Silver8125 Material
Control:C5001438 1/4”Bronze/Silver8125 Material

DeadZone DZ-32 Small Cam Bows:

String:C5006252 1/4”Bronze/Silver8125-12” End Serving
Buss:C5006334 1/8”Bronze/Silver8125 Material
Control:C5001438 1/4″Bronze/Silver8125 Material

DeadZone DZ-30 Large Cam Bows:

String:C5004853 1/16”Green/Brown8125-16” End Serving
Buss:C5004932 15/16”Green/Brown8125 Material
Control:C5006736 1/4″Green/Brown8125 Material

DeadZone DZ-30 Small Cam Bows:

String:C5006550 3/8”Green/Brown8125-12” End Serving
Buss:C5006632”Green/Brown8125 Material
Control:C5006736 1/4”Green/Brown8125 Material

DeadZone DZ-36 Large Cam Bows:

String:C5005158 5/8”Mt.Berry/Bronze8125-16” End Serving
Buss:C5005238 5/8”Mt.Berry/Bronze8125 Material
Control:C5005342”Mt.Berry/Bronze8125 Material

DeadZone DZ-36 Small Cam Bows:

String:C5006856 1/4″Mt.Berry/Bronze8125-12” End Serving
Buss:C5006938”Mt.Berry/Bronze8125 Material
Control:C5007042 1/4″Mt.Berry/Bronze8125 Material

SpeedZone Large Cam Bows:

String:C5005457 1/4”Blue/Silver8125-16” End Serving
Buss:C5005537 1/4″Blue/Silver8125 Material
Control:C5005640 5/8”Blue/Silver8125 Material

SpeedZone Small Cam Bows:

String:C5007454 1/4″Blue/Silver8125-12” End Serving
Buss:C5007536”Blue/Silver8125 Material
Control:C5007640 1/4”Blue/Silver8125 Material

Bow Cam Mods Chart

DEADZONE MOD CHART – DRAW LENGTH

SPEEDZONE MOD CHART – DRAW LENGTH

Small Cam Mods

DZ-30

DZ-32

DZ-36

PART #

Small Cam Mods

SZ- 34.5

 PART #

H1A* TR/BR 1

25”

25.5”

27.5”

9001

H1A* TR/BR 1S

25”

9031

H1A* TR/BR 2

25.5”

26”

28”

9003

H1A* TR/BR 2S

25.5”

9033

H1A* TR/BR 3

26”

26.5”

28.5”

9005

H1A* TR/BR 3S

26”

9035

H1A* TR/BR 4

26.5”

27”

29”

9007

H1A* TR/BR 4S

26.5”

9037

H1A* TR/BR 5

27”

27.5”

29.5”

9009

H1A* TR/BR 5S

27”

9039

H1A* TL/BL 1

25”

25.5”

27.5”

9002

H1A* TL/BL 1S

25”

9032

H1A* TL/BL 2

25.5”

26”

28”

9004

H1A* TL/BL 2S

25.5”

9034

H1A* TL/BL 3

26”

26.5”

28.5”

9006

H1A* TL/BL 3S

26”

9036

H1A* TL/BL 4

26.5”

27”

29”

9008

H1A* TL/BL 4S

26.5”

9038

H1A* TL/BL 5

27”

27.5”

29.5”

9010

H1A* TL/BL 5S

27”

9040

Large Cam Mods 

DZ-30

DZ-32

DZ-36

PART #

Large Cam Mods 

SZ- 34.5

PART #

H2C* TR/BR 1

27.5”

28”

30”

9011

H2C* TR/BR 1S

27.5”

9041

H2C* TR/BR 2

28”

28.5”

30.5”

9013

H2C* TR/BR 2S

28”

9043

H2C* TR/BR 3

28.5”

29”

31”

9015

H2C* TR/BR 3S

28.5”

9045

H2C* TR/BR 4

29”

29.5”

31.5”

9017

H2C* TR/BR 4S

29”

9047

H2C* TR/BR 5

29.5”

30”

32”

9019

H2C* TR/BR 5S

29.5”

9049

H2C* TR/BR 6

30”

30.5”

32.5”

9021

H2C* TR/BR 6S

30”

9051

H2C* TL/BL 1

27.5”

28”

30”

9012

H2C* TL/BL 1S

27.5”

9042

H2C* TL/BL 2

28”

28.5”

30.5”

9014

H2C* TL/BL 2S

28”

9044

H2C* TL/BL 3

28.5”

29”

31”

9016

H2C* TL/BL 3S

28.5”

9046

H2C* TL/BL 4

29”

29.5”

31.5”

9018

H2C* TL/BL 4S

29”

9048

H2C* TL/BL 5

29.5”

30”

32”

9020

H2C* TL/BL 5S

29.5”

9050

H2C* TL/BL 6

30”

30.5”

32.5”

9022

H2C* TL/BL 6S

30”

9052



LimbSaver is dedicated to making Products That Work!

Since 1991, we have endeavored to design and manufacture industry-leading products that set the bar in terms of precision, performance, and reliability. We don't bring a product to market until it's the best, and we stand behind all of our products. 

We produce highly effective noise- and vibration-dampening products using state-of-the-art technologies for archery and firearm products, including bow stabilizers, recoil pads, rifle slings, and more.

Our products are widely used by outdoor enthusiasts, military, law enforcement, and more.


If you have questions about a product, or if you need help with a product you've purchased, please call us at (360) 427-6031 Mon-Fri, 8am-4pm PST.